Taking the steering wheel off Peugeot is not very difficult; all you need is a toolkit and hands growing from the right place))
The first thing to be done is to take the clamp off the accumulator and wait 10 minutes in order to avoid an airbag’s response in time of its deactivating. Next comes the inescapable damage of the wheel, you will have to pierce the two openings, which are marked on the wheel astride, through, as shown on the photo.
Having pierced the wheel’s covering with a flat blade screwdriver, you need to unbend its locking pawls, take the airbag out and disconnect the housings. Turn the bolt, which holds the wheel on the rod, off with the help of Torex T-50.
Tapping, take the wheel off, pulling to self.
Cautions: you must not twist the set of points with wires from the airbag and the hooter on the understeering mechanism. You must install a new or an old wheel according to its previous location in direction of the blind spur on the steering rod.
Further, you need to assemble everything in the reverse order and mind your step while installing the airbag, pay attention to the adjusting in order not to spoil the electric wiring.
Leave a Reply